'41 - '59 Chevy Truck Chassis
Hotshoe Hot Rods 41-49 Chevy Chassis
Hotshoe Hot Rods 55-59 Chevy Chassis
'41-'59 Chevy Truck Boxed Frame Rails
Four piece frame rails are laser cut from 11 gauge P&O steel plate and welded on rail fixture. Welds are ground to a 50 grit finish. $2,750
'41-'59 Chevy Truck Perimeter Frame
Laser cut, 4 piece boxed frame rails, tubular center cross member with removable transmission mount, front core support mount, rear cross support and body cab mounts. (no front cross member). $6,200
'41-'59 Chevy Truck Basic Frame
Perimeter frame, engine mounts (SBC or SBF), Mustang II front cross member, brake pedal pivot, master cylinder mount, brake push rod, rear 4 bar frame brackets and rear coil over shock mount. $8,297
'41-'59 Chevy Truck Rolling Chassis
Mustang II Front End with GM Disc Brakes, tubular upper and lower control arms, brake pedal and master cylinder mount, new 9" Ford housing with 31 spline axles (no 3rd member), rear 10" drum brakes, rear parallel 4 bar suspension with panhard bar and rear adjustable coil over shocks. $12,750
Chassis with your choice of IFS:
Heidt's Superide IFS: $14,850
Note: Crating and shipping not included. 75% Down Payment Required on all Rolling Chassis and final payment due 5 business days prior to shipping.
Four piece frame rails are laser cut from 11 gauge P&O steel plate and welded on rail fixture. Welds are ground to a 50 grit finish. $2,750
'41-'59 Chevy Truck Perimeter Frame
Laser cut, 4 piece boxed frame rails, tubular center cross member with removable transmission mount, front core support mount, rear cross support and body cab mounts. (no front cross member). $6,200
'41-'59 Chevy Truck Basic Frame
Perimeter frame, engine mounts (SBC or SBF), Mustang II front cross member, brake pedal pivot, master cylinder mount, brake push rod, rear 4 bar frame brackets and rear coil over shock mount. $8,297
'41-'59 Chevy Truck Rolling Chassis
Mustang II Front End with GM Disc Brakes, tubular upper and lower control arms, brake pedal and master cylinder mount, new 9" Ford housing with 31 spline axles (no 3rd member), rear 10" drum brakes, rear parallel 4 bar suspension with panhard bar and rear adjustable coil over shocks. $12,750
Chassis with your choice of IFS:
Heidt's Superide IFS: $14,850
Note: Crating and shipping not included. 75% Down Payment Required on all Rolling Chassis and final payment due 5 business days prior to shipping.
Upgrade Options
Positraction Third Member: $1000
Rear Wilwood Disc Brakes with E-Brake: 850
Brake Lines: $850
Stainless Steel Brake Lines: $935
3rd Member (Non-Posi) Up to a 3:50 Gear - $850
3rd member (With Positraction) Up to a 3:50 Gear - $1,150
Rear Wilwood Disc Brakes with E-Brake: 850
Brake Lines: $850
Stainless Steel Brake Lines: $935
3rd Member (Non-Posi) Up to a 3:50 Gear - $850
3rd member (With Positraction) Up to a 3:50 Gear - $1,150
